Panasonic DVCPRO AJ-D410AP Operating Instructions Manual page 35

Menu contents
MAIN menu 1 of 2 (main menu)
VIDEO IN/OUT
Setting
Item
options
VIDEO OUT MENU ON For selecting whether to output the menu
OFF screens to the VIDEO OUT connector.
ON: For the screens are output.
OFF:For the screens are not output.
<Note>
The VIDEO OUT MENU item is valid only
when ENC has been selected as the
VIDEO OUT setting.
VIDEO OUT SEL ENC For selecting whether the VTR signals or
VF VF signals are to be output from the VIDEO
OUT connector.
ENC: For VTR output
VG: For VF output
SET UP 0% For selecting the CAM signal setup. When
7.5% 7.5% is selected, 7.5% setup is also
applied to the tape.
VTR FUNCTION
Setting
Item
options
TC MODE DF For setting the time code to the DF or NDF
NDF mode.
DF: For drop frame mode
NDF:For non-drop frame mode
UB MODE USER For selecting what is to be recorded in the
TIME user's bit area.
DATE USER: User setting (fixed)
TCG TIME: Real time value in hours/minutes/
EXT
DATE: Real time value in year/month/day/
TCG: Time code generator value
EXT: The UBG value is slave-locked
FIRST REC TC REGEN For selecting whether the TC REGEN
PRESET mode is to be established when recording
is started.
REGEN: The
PRESET: The regeneration mode is not
FF/REW SPEED For setting the fast forward and rewind
a32
speed.
a64
a a 32: 32 times normal speed
a a 64: 64 times normal speed
TC OUT TCG For selecting the TC OUT output.
TCG/TCR TCG:
The TCG value is output at all times to
TC OUT regardless of EE/VV.
TCG/TCR:
In the EE status, the TCG value is output
to TC OUT; in the VV status, the TCR
value is output.
Remarks
Remarks
seconds
hours
when the external time code is
input.
regeneration mode is
established for the time code on
the tape.
established for the time code on
the tape. However, it is forcibly
established when the unit is
transferred from REC PAUSE to
REC.
VTR OPTION
Setting
Item
options
TIME STAMP REC
NO-REC
INTERVAL REC OFF
ON
ONE-SHOT
REC TIME 00m05s
:
59m59s
INTERVAL TIME 00h00m10s
:
23h59m59s
PAUSE TIMER 10min
20min
30min
60min
WIRELESS WARN ON
OFF
" " indicates the factory setting.
35
Remarks
For selecting whether to superimpose the date
and time onto the camera's video recording.
REC: For superimposed
NO-REC: For not superimposed
<Note>
When REC is selected, select the type of
date and time to be superimposed with the
TIME/DATE item of <VF DISPLAY 2/2>
sub-menu.
For setting whether to perform intermittent
recording.
OFF: Not performed
ON: Performed
ONE-SHOT: Recording is performed once for
the period set for REC TIME, and
then stops.
For setting the recording time
intermittent recording.
<Note>
The REC TIME setting is effective only
when ON or ONE-SHOT is set for
INTERVAL REC.
For setting the REC PAUSE time during
intermittent recording.
<Note>
The INTERVAL TIME item is valid only
when ON has been selected as the
INTERVAL REC setting.
For setting the time that is allowed to elapse
before REC PAUSE is replaced with SAVE.
For selecting whether the WIRELESS RF
warning is to be displayed on the viewfinder
screen if the signals received when the
wireless receiver is used are weak.
ON: Displayed OFF: Not displayed
for