User Programming (Manager Programming) - Panasonic KX-TD308 User Manual

3.1 User Programming Instructions
Making another selection within the same program address
• To go to the next selection, press NEXT.
• To go to the previous selection, press PREV.
• To make a specific selection, press SELECT and then enter the number.
Accessing another program address
After pressing STORE, you can access another program by one of the following two
methods:
(1) • To go to the next larger program address:
(2)
Returning to the normal operation mode
There are two ways to return to the normal operation mode:
(1) Lift the handset while in programming mode.
(2) When the Initial Message: USR-PGM NO?
3-6

User Programming (Manager Programming)

Press Soft 1 (SKP+) or VOLUME
• To go to the next smaller program address:
Press SHIFT + Soft 1 (SKP–) or VOLUME
To go to a specific program address:
Press END, then enter the program address.
button.
(To display the Initial Message, press END.)
(DOWN).
(UP).
is displayed, press the PROGRAM