Panasonic KX-TD308 User Manual page 56

2.2 Station Programming (Personal Programming)
Phantom Extension Button
Allows you to assign a Flexible CO button as a Phantom Extension button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
7
3
phantom extension number
4
AUTO DIAL
STORE
— To exit the Station Programming mode : Press [PROGRAM] or lift the handset.
Conditions
• A phantom extension number must be registered in program [124], "Phantom Extension
Number Assignment", before assigning a Phantom Extension button.
• If you change the telephone to a model which does not have the same CO button
number which is assigned as a Phantom Extension button, you must re-program the
setting. If you do not change the setting, a phantom extension call will be sent to the
INTERCOM button.
For example, if you assigned a Phantom Extension button to CO button number 15 on a
KX-T7230 telephone and change the telephone to a KX-T7235 model, you must re-
program the setting because a KX-T7235 telephone only has 12 CO buttons.
(Assignment)
1. Press the desired Flexible CO button you wish to assign as a
Phantom Extension button.
2. Dial 72.
• The display shows:
2
3. Enter the phantom extension number.
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the
programming mode.)
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
Station Programming (Personal Programming)
Phantom:
CLR
Phantom:xxxx
CLR
(— xxxx: phantom extension
number)
2-15