Panasonic KX-TD308 User Manual page 389

6
Initial Display Selection
• Enter into programming mode.
• Dial 81.
• Dial 1 or 2.
- 1 : Caller ID
- 2 : Outside line name
• Press STORE button.
• Exit from programming mode.
Intercom Alert Assignment
• Enter into programming mode.
• Dial 4.
• Dial 1 or 2.
- 1 : Ring-Calling (Tone Call) mode
- 2 : Voice-Calling mode
• Press STORE button.
• Exit from programming mode.
Live Call Screening Mode Set †
• Enter into programming mode.
• Dial 7 .
• Dial 1 or 2.
- 1 : for the Hands-free mode
- 2 : for the Private mode
• Press STORE button.
• Exit from programming mode.
Preferred Line Assignment
— Incoming
• Enter into programming mode.
• Dial 2.
• Dial 1, 2, or 3 + outside line number.
- 1 : No Line Preference
- 2 : Ringing Line Preference
- 3 + Outside line number
: Prime Line (Outside Line) Preference
• Press STORE button.
• Exit from programming mode.
Quick Reference
Preferred Line Assignment
— Outgoing
Ringing Tone Selection for CO
Buttons
Self-Extension Number
Confirmation
Station Programming Data Default
Set
• Enter into programming mode.
• Dial 1.
• Dial 1, 2, 3 + outside line number, or press
INTERCOM button.
- 1 : No Line Preference
- 2 : Idle Line Preference
- 3 + Outside line number
: Prime Line (Outside Line) Preference
- INTERCOM
: Prime Line (INTERCOM) Preference
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired CO button.
• Press the same CO button again.
• Dial the tone type number (1 through 8).
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Dial 6.
• Press HOLD (END) button.
• Exit from programming mode.
• Enter into programming mode.
• Dial #.
• Press STORE button.
• Exit from programming mode.
Quick Reference
6-5