Operator Call - Panasonic KX-TD308 User Manual

O

Operator Call

Allows you to call an operator within the system. Two extensions can be assigned as
Operator 1 and 2.
1
2
0
Conditions
• The call is routed to Operator 1 first. If Operator 1 is busy, then it is routed to
Operator 2. Through System Programming, it is possible to change the routing so
that Operator 1 and Operator 2 are called simultaneously when the operator is called.
• If an operator is not assigned, this feature is not available and you will hear a reorder
tone.
Programming References
• System Programming — Installation Manual
[990] System Additional Information, Field (44)
4-92
DPT Features
4.2
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (0).
DPT Features