Panasonic KX-TD308 User Manual page 147

C
To talk to the original party while holding the third party
1
TRANSFER
To put both parties on hold
1
HOLD
Conditions
• Up to six conference calls are allowed simultaneously.
• A conference call can also be established by "Executive Busy Override" or "Privacy
Release".
• Pressing a CO button which is not in the conference, allows you to exit from the
conference leaving the other two parties connected unless they are both outside lines.
If the other parties are both outside lines, they will be disconnected.
• You can return to the original party before the third party answers by pressing the
TRANSFER button.
• A flexible button on the KX-T7250 (no CONF button provided) can be assigned as the
CONF button.
• When a two-party call is changed to a three-party call or vice versa, a confirmation tone
is sent to all three parties. Eliminating the tone is programmable.
Programming References
• Station Programming (Section 2)
Flexible CO Button Assignment — Conference (CONF) Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• System Programming — Installation Manual
[990] System Additional Information, Field (13)
Feature References
Conference, Unattended
Executive Busy Override — Extension
Executive Busy Override — Outside Line
Privacy Release
4-50
DPT Features
4.2
1. Press the TRANSFER button.
• You hear a confirmation tone (optional).
• If both of the other parties are extensions, the INTERCOM
indicator light flashes green moderately.
1. Press the HOLD button.
• This feature is only available when at least one party is on an
outside line.
DPT Features