2.4.2
Caller ID and OGM/FAX Detection Card Installation
Install the Caller ID Card for
the KX-TA62477 here.
Condition
Programming Reference
Feature References
2-22
Installation
3. Attach the optional cards.
Caller ID Card
(KX-TA62493)
4. Insert the flat cables to each card connector.
5. Close the cover.
• Be sure the frame of the main unit is connected to the ground. Refer
to Section 2.2.4 "Frame Ground Connection".
See "Programming References" in Section 3, Features, Caller ID and
Direct Inward System Access (DISA).
Section 3, Features
Caller ID
Direct Inward System Access (DISA)
Outgoing Message (OGM)
OGM/FAX Detection Card
(KX-TA62491)
Note
Please do not damage this part.
Flat cables