Panasonic KX-TA624 Installation Manual page 331

4.2 System Programming
Doorphone Ringing Assignment — Day/Night/Lunch
Description
Selection
Default
Programming
Conditions
Feature References
These programs assign which extensions will ring when a
doorphone call is received in the day, night and lunch modes.
• Doorphone number: 1 – 4,
• Jack number: 01 – 24,
• Enable / Disable
All doorphones – all jacks – Enable — Day/Night/Lunch
1. Enter a program address (700 for day, 701 for night or 702
for lunch).
Display example: Day Door Phone
2. Press NEXT.
Display: Door NO?
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:#01:Enable
4. Keep pressing
or enter a jack number after pressing the # key.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press
desired jack number.
8. Repeat steps 5 through 7.
9. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
10. Repeat steps 4 through 9.
11. Press END.
• To assign all doorphones and all jacks to the same selection, press the
key in steps 3 and 4.
In this case, the display will show: DP- :#
• Four doorphones can be installed to the system.
Section 3, Features
Doorphone Call
Time (Day/Night/Lunch) Service
700–702
( = all doorphones)
( = all jacks)
until the desired jack number is displayed
or
:Mixed.
System Programming
, or # and the
4-117