Panasonic KX-TA624 Installation Manual page 295

4.2 System Programming
Outside (CO) Line Ringing Pattern Selection
Description
Single:
Double:
Triple:
Selection
Default
Programming
Conditions
Feature Reference
Assigns an incoming outside call ringing pattern for each outside
(CO) line. There are three types of patterns as follows.
1 s
• Outside (CO) line number: 1 – 6,
• Single / Double / Triple
Single
1. Enter 423.
Display: CO Ring Pattern
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Single
4. Keep pressing SELECT until the desired time is displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
• The programs [115] "Extension Ringing Pattern Selection" and
[706] "Doorphone Ringing/Tone Pattern Selection" should be
considered when assigning this program.
Section 3, Features
Ringing Pattern Selection for Intercom Calls and Outside (CO) Lines
( = all outside (CO) lines)
:Mixed.
System Programming
423
key
4-81