Panasonic KX-TA624 Installation Manual page 206

Advanced hybrid system
Hide thumbs Also See for KX-TA624:
Table of Contents

Advertisement

V
Conditions
3-144
Features
• A maximum of two VPSs can be connected to the system. When two
VPSs are connected to the system, keep in mind that each extension can
have only one mailbox — but when the VPSs have executed Auto
Configuration, an extension has a mailbox in both VPSs. Therefore, you
must delete a mailbox in either VPS so that there are no duplicates. See
the KX-TVS50 Installation Manual for further details.
Extension
group 7
KX-TA624
Extension
group 8
• A maximum of four extension jacks (07, 08, 15 and 16) of the system
can be connected to VPSs with four-conductor wire. Extension jack
number 07, or jack numbers 07 and 08 can be the voice mail APT ports
for VPS1 in program [130]. Extension jack number 15, or jack numbers
15 and 16 can be for VPS2 in program [131].
• When "Port 7 & 8" is selected in program [130], extension jack
numbers 07 and 08 will be in extension group 7 automatically.
Likewise, when "Port 15 & 16" is selected in program [131], extension
jack numbers 15 and 16 will be in extension group 8 automatically. Also
the Station Hunting type is set as "Circular", and the VM Hunting Chain
and AA Hunting Chain are enabled automatically in each of these two
extension groups.
• The lowest jack number (07 or 15) of each extension group must be
connected to the Port 1 of a VPS. The VPS data is transmitted to the
VPS via the Port 1.
• One connection between the system and a VPS, for example extension
jack number 07 of the system and Port 1 of the VPS, creates one Voice
Mail extension and can only answer one call. Therefore, if one VPS is
connected to the system, maximum of two calls can be answered
simultaneously.
• A VPS can be assigned as the destination for the following features.
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
DISA Intercept Routing – No Answer
For these features, the caller does not need to know the mailbox number
of the called extension because the code is automatically transmitted to
the VPS (Follow On ID feature). If a DISA call is transferred to the
VPS by Intercept Routing from a ring group, the system will transmit
the mailbox number of the lowest jack number of the receiving
extensions.
3
KX-TVS50/KX-TVS80 (VPS1)
7
8
KX-TVS50/KX-TVS80 (VPS2)
15
16
Features
Port 1
Port 2
Port 1
Port 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents