Packard Bell EasyNote L Disassembly Manual page 9

8
Fig. 12 Removing the heat plate screws.
2. Close the LCD, flip over the notebook and remove the 2 screws securing the LCD module.
Fig. 13 Removing the LCD module screws (bottom).
3. Remove the 2 screws on the back.
Fig. 14 Removing the LCD module screws (rear).
4. Open up the LCD and gently disconnect the LCD power cable and the 2 WLAN antenna
cables.
Fig. 15 Location WLAN antenna cables and LCD power cable.
Note
The black WLAN antenna cable is on the connector, the grey one on the connector.
MAIN AUX
Packard Bell EasyNote L Disassembly Manual