Post-Installation - Western Digital WD Serial ATA RAID Controller User Manual

WD SERIAL ATA RAID CONTROLLER
USER MANUAL
Q: How can I change the boot sequence between a PCI SCSI card and the
WD SATA RAID Controller RAID array?
A: Since all PCI devices are Plug and Play, it is difficult to determine which device is
addressed first. Some newer motherboard BIOSs have advanced options that identify devices
and allow you to select which device will be assigned resources first. Otherwise you may have
to physically switch the device cards on the PCI slots so that the boot device is in the highest
priority slot number (see previous question).

Post-Installation

Q: Why can't I see the drives on the WD SATA RAID Controller under FDISK?
A: You have not created an array yet. If no array has been created, the system will not
recognize drive(s) attached to the WD SATA RAID Controller.
FREQUENTLY ASKED QUESTIONS - 33