Confirming Windows Xp Driver Installation; New Windows 2000 Installation - Western Digital WD Serial ATA RAID Controller User Manual

Confirming Windows XP Driver Installation

1. Right-click on the My Computer icon and select Manage from the popup menu.
2. From the left panel, select Device Manager.
3. Click the + in front of SCSI and RAID controllers. "WinXP WD SATA RAID
Controller" should appear.

New Windows 2000 Installation

The following details the installation of the WD SATA RAID Controller drivers while
installing Windows 2000.
1. Start the installation by booting from the drivers diskette. Press F6 after the message
"Press F6 if you need to install third party SCSI or RAID driver" appears.
2. When the Windows 2000 Setup window is generated, press S to specify an Additional
Device(s).
3. Choose Win2000 WD SATA RAID Controller from the list that appears on screen then
press .
ENTER
4. The Windows 2000 Setup screen will appear again saying "Setup will load support for the
following mass storage devices:" The list will include "Win2000 WD SATA RAID
Controller."
Note: If there are any additional devices to be installed, specify them now. When all
devices are specified, continue to the next step.
5. From the Windows 2000 Setup screen, press
and then continue the Windows 2000 installation.
WD SERIAL ATA RAID CONTROLLER
. Setup will now load all device files
ENTER
INSTALLING SOFTWARE DRIVERS - 17
USER MANUAL