Western Digital WD Serial ATA RAID Controller User Manual page 26

10. Press . The following screen displays.
ENTER
EasyBuild(tm) Utility 2.xx (c)2003 Western Digital Technologies, Inc.
Array No RAID Mode
Array 2 Mirror
Stripe Block: Not Available
Channel:ID Drive Model
1 : WD WD740GD-00DAC3
[ ] Up [ ] Down [ESC] Exit
↑ ↓
11. Under Select Drive for Rebuild, highlight the replacement drive by using the up or down
keys.
ARROW
12. Press and confirm that the data will be copied on to the selected drive. All data on
ENTER
the replacement drive will be written over with mirrored information from the array drive.
A progress bar appears.
13. Once the rebuild process is complete, reboot the system. The WD SATA RAID
controller's BIOS will now display the drive with no errors.
Note: Disk Duplication (rebuilding) may take up to several hours depending on how
much data will be copied to the new drive. For instance, 120 GB of data would take one
to two hours on average to be duplicated in a newer computer system.
[Rebuild Array Menu]
Total Drv Status
2 Critical
Gigabyte Boundary: ON
[Select Drive for Rebuild]
Capacity(MB)
74025
[Keys Available]
[Enter] Select
WD SERIAL ATA RAID CONTROLLER
USER MANUAL
EASYBUILD OPTIONS AND FEATURES - 22