Summary of Contents for Western Digital WD1003V-SR1
Page 1
USER'S GUIDE WD1003V-SR1 Winchester Disk Controller WD 1003 V-SR2 Winchester/Floppy Disk Controller Important Information Do Not Discard...
Page 2
3. Remove the blank expansion slot bracket. Put the bracket Product Description away and save it for possible future use. The screw will be TABLE 1. JUMPER SETTINGS This document describes the hardware and software used to hold the new controller board in place. It is best to installation of the WDl003V-SRl and WD1003V-SR2, 16-bit locate the controller in the closest available expansion slot disk controllers for the IBM * Personal Computer AT * or AT...
Software Installation This section contains instructions for low level formatting the Winchester drives. You can low level format the Winchester drive(s) by one of two methods. Third party software available from Storage Dimensions * , Ontrack * , or other companies can low level format the drive(s).