Event Setting - Vivotek FE8171V User Manual

7.29 Customized event script
Group: event_customtaskfile_i<0~2>
PARAMETER
name
date
time

7.30 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
VALUE Default
string[41] <blank>
string[17] <blank>
string[17] <blank>
VALUE Default
string[40] <blank>
0, 1 0
0, 1, 2 1
1~999 20
boot, boot
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
String[40] trigger
<integer> 1
SECURITY DESCRIPTION
(get/set)
6/7 Custom script identification of this
entry.
6/7 Date of custom script.
6/7 Time of custom script.
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
VIVOTEK
User's Manual - 167