Event Setting - Vivotek SD9365-EHL User Manual

7.26 Customized event script
Group: event_customtaskfile_i<0~2>
PARAMETER
name
date
time

7.27 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
VALUE SECURITY
(get/set)
string[40] 6/6
string[4~20] 6/6
string[4~20] 6/6
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product dependent>
string[40] 6/6
DESCRIPTION
Custom script identification of this entry.
Date of custom script.
Time of custom script.
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0"= low priority
"1"= normal priority
"2"= high priority
Delay in seconds before detecting the next
event.
Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"pir"= PIR detection
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
"volalarm"= Audio detection
"smartsd"= Lifetime detection of SD card
The status for event trigger
VIVOTEK
User's Manual - 278