Vivotek FE8171V User Manual page 15

General Connection (without PoE)
1. If you have external DI devices, make the connection from general I/O terminal block.
2. Ethernet, power and IO cables are user-supplied. Use a Category 5 Cross Cable when
Network Camera is directly connected to PC.
3. Connect DC power cord to a DC Adapter, and then to a power outlet.
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
+3V3 : Power, 3.3V DC
+3V3
D O : Digital Output
DO
D I : Digital Input
DI
G N D : Ground
GND
The power adapter should comply with L.P.S.
regulations featuring O/P: 12V DC, 1.5A min.
1
2
NOTE:
VIVOTEK
Ethernet
Switch
User's Manual - 15