Vivotek FE8171V User Manual page 81

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Profile Settings page as shown below.
Please follow the steps below to setup a profile:
1. Check Enable and apply this profile.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Configure the settings in the following columns. Please refer to the previous page for detailed
information.
4. Click Save to enable the settings and click Close to exit the page.
2011/03/13 17:08:56 2011/03/13 17:08:56
VIVOTEK
User's Manual - 81