Stopping The Central Heating/Cooling - Viessmann VITOCAL 222-G Operating Instructions Manual

Change the heating curve
Note
Setting the slope or level of the heating
curve too high or too low will not result in
damage to your heat pump or your heat-
ing system.

Stopping the central heating/cooling

Standard menu
1. "Heating" or "Heating/cooling"
2. Where appropriate, select a heating/
cooling circuit or the separate cooling
circuit.
3. "Operating program"
4. "Only DHW" (no central heating/cool-
ing, only frost protection monitoring)
or
"Standby mode" (no central heating/
cooling, only frost protection monitor-
ing)
Central heating/cooling
(cont.)
23