Error Messages - Tascam CD-200SB Owner's Manual

9 – Message Lists

Error messages

If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct
the problem, please contact the nearest retailer or TASCAM representative.
Message
COMM ERR
Cannot communicate with the CD drive.
(Blinking)
COMM ERR An error occurred during communication with the CD drive.
DEC ERR The file type is not supported or otherwise could not be played.
The TOC or file system could not be read, or focus adjustment was
DISC ERR
not possible.
DRV ERR The CD drive hardware is broken.
MEDIAERR The file system cannot be read.
The path might either be too long or contain characters that the
PATH ERR
unit cannot recognize.
READ ERR The track cannot be accessed.
44
TASCAM CD-200SB
Meaning Response
Contact the nearest retailer or TASCAM represen-
tative.
Contact the nearest retailer or TASCAM represen-
tative.
Change the disc
Clean or change the disc.
Contact the nearest retailer or TASCAM represen-
tative.
Format the media using a computer. If this does not
work, try replacing the media.
Revise the folder and file names so that the path,
including the file extension, contains only ASCII
characters and is no more than 255 characters. (The
maximum number of folder levels is 16.)
Clean or change the disc.