Dimensional Drawing; Error Messages - Tascam CD-01 U Owner's Manual

8 - Specifications

Dimensional drawing

Error messages

Err 01 TOC Read error - the disc's Table of Contents cannot be read - try with another disc or remove and clean the
existing disc before replacing it
Err 02 GFS error GFS signal cannot be detected - try with another disc or remove and clean the existing disc
before replacing it
Err 03 Focus error - after repeating the attempt eight times to focus, an error still occurs - try with another disc or
remove and clean the existing disc before replacing it
Err 04 Sub-Q error - the sub-Q code cannot be detected - try with another disc
Err 05 Loading error - the loading operation cannot be completed, even after retries, or there is an internal error - make sure
that there are no obstructions preventing the loading operation
Err 06 Sled error - an internal drive error - try turning the power off, waiting a few seconds, and turning it on again
Err 07 S-DRAM error - an internal S-DRAM error - try turning the power off, waiting a few seconds, and turning it on again
Err 08 System error - an internal error - try turning the power off, waiting a few seconds, and turning it on again
If any of the numbered error messages occur, try using another disc.
If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again.
If the errors still continue or other error occurs, contact your TASCAM distributor for repair.
26
TASCAM CD-01U/CD-01UPro
435mm (17.1")
482.6mm (19")