Page 1
» CD-450 Compact Disc Player Ü ÿ The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.. The exclamation point within an equilateral triangle is intended to alert the user to the pres- Ÿ...
IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN. TASCAM CD-450 TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
24) Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. TASCAM CD-450 ANTENNA LEAD IN WIRE...
Page 4
- IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. • CAUTION • ACHTUNG • OBSERVERA TASCAM CD-450 Optical pickup : Type : KSS-213C Manufacturer : SONY Corporation Laser output : Less than 0.4 mW on the objective lens...
Before Getting Started Thank you for choosing the TASCAM CD-450 com- pact disc player. To get the most out of your CD-450, spend some time now to read this manual. If you read this manual thor- oughly at least once, you will know where to turn when you need answers.
Enables the whole disc, or, used in conjunction with the SINGLE key, a single track, to play over and over ® again. N DISPLAY Key Selects ELAPSED, REMAIN or TOTAL REMAIN displays. ® Preference Settings, p.9 ® ® p.10 p.10 TASCAM CD-450 p.10...
40 mA at maximum. The tip goes active at EOM or STOP time (as selected in the preference set- ting screen), and the ring goes active at PLAY. For the TASCAM CD-450 wiring of these conductors, see illustration under the heading, "Fader Start," p.11.
Press the SEARCH MODE key to let the TIME LED light up. Enter a track number then a time point. The deck starts playing from the time point desig- nated if you let the search operation start from STOP. TASCAM CD-450...
Page 10
During play, press the A-B REPEAT key at the desired start point of play loop, and again press the key at the desired end point of your loop. TASCAM CD-450 Changing the Pitch By operating the " " and "...
On/Off of REPEAT START connector … On/Off of SINGLE … On/Off of INCR PLAY … On/Off of AUTO READY … DISPLAY mode (ELAPSED, REMAIN, or TOTAL REMAIN) … On/Off of AUTO CUE … SEARCH MODE FADER/EVENT START connector Operations TASCAM CD-450...