11 – SD Card Management
Initializing SD cards
If you want to use an SD card that was used with this unit
on other equipment, we recommend that you initialize it.
When you initialize an SD card, the entire card is formatted
as FAT32.
1 When the recorder is stopped, press the MENU
button to open the
MENU
2 Turn the DATA wheel to select
F4 (¥) button to open the
3 Turn the DATA wheel to select the
item and press the F4 (¥) button.
INITIALIZE
A pop-up message warning that all data on the card
will be erased appears.
4 Press the F3 (
) button to initialize the entire
YES
card and format it as FAT32.
To cancel initialization, press the F4 (
CAUTION
After initializing an SD card, it is necessary to format it if
you want to use it with the DP-03 again. (See "Formatting
SD cards" on page 32).
64
TASCAM DP-03
screen.
, and press the
CARD
menu screen.
CARD
SD
) button.
NO