Screen Operations - Tascam Digital Portastudio DP-03 Owner's Manual

3 – Names and Functions of Parts
Use the following dedicated buttons to access specific
functions.
Button Explanation
Turn PHANTOM
PHANTOM power ON and
OFF.
Assign INPUT A
ASSIGN
or B as the track
source.
BOUNCE
Bounce a track.
Make and adjust
MIXDOWN/
stereo master
MASTERING
tracks.
Make reverb
REVERB
settings.
Make track and
EQ
input equalizer
settings.
MUTE
Mute tracks.
Use to tune
TUNER
instruments
Use to operate
METRONOME
the metronome
Use to set and
jump to marks
LOCATE LIST
[LOCATE SET]
and IN/OUT/TO
points.
Press and hold to
UNDO/REDO
show the undo/
[HISTORY]
redo history and
select undo steps.

Screen operations

Use the MENU button and dedicated buttons to open
screens. Follow the guidelines below to use the functions
on the screens. These examples show basic operation
procedures, but the actual assignments of the function
buttons vary depending on the screen.
DATA wheel to select the desired item.
Use the
•
In this example from the
MENU
by the F4 (¥) button.
NOTE
The assignments of the function buttons are shown at the
bottom of the screen above the buttons themselves.
30
TASCAM DP-03
Reference page
38
39
44
55, 56, 58
53
39, 53
54
59, 60
59
45, 46, 47
41, 42
screen, " " is selected
SONG
appears above the F1 button, so the assignment
BACK
of the F1 button is "
BACK
this manual, we show this as the "F1 (
Likewise, the assignments of the F2, F3 and F4 buttons
are , and
EXEC INS DEL
When an item has a sub-screen (the
•
example) a "¥" appears to the right of the item. Use the
F4 (¥) button to advance to that sub-screen.
On a sub-screen, press the
•
to the previous screen.
To execute an item, press the function button with the
•
" " assignment.
EXEC
In this example of the
SONG LOAD
the F2 ( ) button the song that is selected by the
EXEC
cursor will be loaded.
When the cursor is on a setting value, use the
•
wheel to change the value. Use the function buttons
with § and ¶ assignments to move the cursor.
In this example of the
COPY PASTE
can use the DATA wheel to change the value of the
. Use the F3 (§) and F4 (¶) buttons
SOURCE TRK
to move the cursor up and down. Press the F2 (
button to copy and paste the contents shown.
When it is necessary to move left and right, use the
•
REW (Ô) (TO ZERO) and F FWD () (TO LAST
REC) buttons. At such times, an illustration appears on
the screen showing that the REW (Ô) and F FWD
() buttons are assigned to control the
HOME button to return to the Home Screen.
Press the
•
" when using this screen. In
) button".
BACK
, respectively.
screen, for
MENU
F1 ( ) button to return
BACK
screen, if you press
DATA
screen, you
EXEC
.
CURSOR
)