Creating An Audio Cd With The Master Track; Insert A Cd - Tascam Digital Portastudio DP-03 Owner's Manual

2 – Quick Start Guides
TIP
Press the F4 ( ) button to open the screen where you
PARM
can also adjust the parameters of the compressor.
4 Press the F2 ( ) button to turn the compressor
ON
ON. The word at the top left of the screen
OFF
changes to .
ON
5 Press the F1 ( ) button to return to the Home
BACK
screen.
6 Press the PLAY (Á) button to listen to the stereo
master track with compression.
NOTE
If the item is also , the effect of the equalizer on the
EQ ON
sound will also be heard.
Normalizing the stereo master track
ª
Normalizing maximizes the volume of the stereo master
track.
1 In mastering mode, press the F3 (
open the
NORMALIZE
2 Press the F4 ( ) button to normalize the track.
EXEC
3 Press the F1 ( ) button to return to the Home
BACK
screen.
Rerecord the stereo master track
ª
Record the master track with equalization and
compression applied to create a new stereo master track.
1 In mastering mode, press and hold the RECORD (º)
button and press the PLAY (Á) button.
2 This will record over the master and create a
new stereo master track with equalization and
compression applied.
20
TASCAM DP-03
) button to
NORM
screen.
Creating an audio CD with the
master track
You can use a stereo master track that you have created to
make an audio CD that can be played on an ordinary CD
player, for example.

Insert a CD

1 In multitrack mode, press the CD button to open
the screen.
CD
CAUTION
The screen cannot be opened in any mode other
•
CD
than multitrack mode. If in mixdown or mastering
mode, press the MIXDOWN/MASTERING button
repeatedly until you return to multitrack mode. If in
bounce mode, press the BOUNCE button to open
multitrack mode.
The disc tray will not open when the Home Screen or a
•
menu screen is shown. Open the disc tray when the
screen or screen is shown.
CD PLAYER
2 Press the F2 ( ) button or the disc tray eject button
ø
on the right side panel to open the tray slightly.
Pull the tray out until it opens completely.
3 Hold the edge of the disc with the label side up and
put it into the tray so that its central hole is on the
round protrusion in the center of the tray. Press the
disc gently near the center to mount it on the tray.
CD