Viewing The Capacity Of The Mtr Partition; Initializing Sd Cards - Tascam Digital Portastudio DP-03SD Owner's Manual

Viewing the capacity of the MTR
partition
Follow these procedures to view the capacity of the MTR
partition.
1 When the recorder is stopped, press the MENU button to
open the MENU screen.
Use the DATA wheel to select CARD, and press the F4 (¥)
2
button to open the CARD screen.
Use the DATA wheel to select PARTITION, and press the
F4 (¥) button to open the PARTITION screen, where
you can view the capacity of the MTR partition.
11 – SD Card Management

Initializing SD cards

If you want to use an SD card that was used with this unit on
other equipment, we recommend that you initialize it.
When you initialize an SD card, the entire card is formatted as
FAT32.
When the recorder is stopped, press the MENU button to
1
open the MENU screen.
Turn the DATA wheel to select CARD, and press the F4 (¥)
2
button to open the CARD menu screen.
Turn the DATA wheel to select the SD INITIALIZE
3
¥
item and press the F4 (
) button.
A pop-up message warning that all data on the card will be
erased appears.
Press the F3 (YES) button to initialize the entire card and
4
format it as FAT32.
To cancel initialization, press the F4 (NO) button.
CAUTION
After initializing an SD card, it is necessary to format it if you
want to use it with the DP-03SD again. (See "Formatting SD
cards" on page 27).
59
TASCAM DP-03SD