A-B Repeat Playback; Auto Cue Function; Repeat - Tascam SS-CDR200 Owner's Manual

4 − Preparations
Using the menu
„
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
2 Open the menu.
PLAY
3 Select .

REPEAT

4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
5 Turn the MULTI JOG dial, (or press the remote
control 5 and b buttons) to set it to
value: ).
OFF
6 Press the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
Using the dedicated remote control
„
button
1 Press the remote control REPEAT button to set
to . A pop-up appears showing that
--Repeat-- ON
repeat playback is ON.
2 Press the remote control FUNC button to open
the screen, and check that
FUNCTION
highlighted.
Turning repeat playback OFF
„
Use the menu
PLAY REPEAT
control REPEAT button to turn it OFF.
The indicator on the
REPEAT
unhighlighted when OFF.
NOTE
The repeat playback setting is retained even after the
power is turned OFF.

A-B repeat playback

This lets you specify a desired region (A-B) within a track
to be played back repeatedly. Follow these procedures to
conduct A-B repeat playback.
1 During playback or when in playback standby,
at the position where you want to start repeat
playback, press the FINDER [A-B] button while
pressing and holding the SHIFT button (or remote
control A-B button) to set the starting point (A).
and appear in a pop-up on the Home
--Repeat-- A-
Screen.
34
TASCAM SS-CDR200/SS-R200/SS-R100
screen.
MENU
(default
ON
is
REPEAT
item or press the remote
screen appears
FUNCTION
NOTE
If you press the remote control REPEAT button, the repeat
playback starting point (A) will be cancelled.
2 Once again press the FINDER [A-B] button while
pressing and holding the SHIFT button (or remote
control A-B button) to set the ending point (B) of
the repeat playback interval.
and appear in a pop-up on the Home
--Repeat-- A-B
Screen.
This completes setting the interval (A-B), and A-B
repeat playback will start.
NOTE
During playback if you press the remote control
•
REPEAT or A-B button,
Repeat
pop-up, A-B repeat playback is cancelled, and playback
will continue even after the designated ending point (B)
is reached.
If you press the front panel or remote control
•
button to stop playback, the designated interval (A-B)
is cleared.
The A-B repeat playback interval cannot span more
•
than one track.

Auto Cue function

If the Auto Cue function is on, and you select a track to
play, any "silent" portion at the beginning of the track
will be skipped, and the track will be put into playback
standby at the point where its "signal" begins to be
audible. This means that sound will be heard immediately
when you start playback.
NOTE
When using the flash start function to start playback,
•
Auto Cue function is disabled.
When the Auto Cue function is on, if a track is selected
•
during playback, playback will start from the point
where it becomes audible. If a track is selected when
in playback standby, playback standby will start at the
point where it becomes audible.
The Auto Cue function setting is retained even after the
•
power is turned OFF.
You can specify the threshold level (Auto Cue LEVEL) used
to detect the audio signal when the Auto Cue function
is active. In other words, any signal higher than the Auto
Cue LEVEL will be treated as "signal, " and any signal lower
than this level will be treated as "silence. "
and appear in a
OFF
STOP