Mono Playback; Eom Functions (Ss-Cdr200/Ss-R200 Only); Setting Eom Tally Output Triggers; Inc.play - Tascam SS-CDR200 Owner's Manual

4 − Preparations
NOTE
When the incremental playback function is ON,
•
pressing the front panel or remote control PLAY button
when in playback standby will start playback from
that position. When in playback standby, pressing the
front panel or remote control STOP button will stop
playback.
When the last track is playing back, pressing the
•
front panel or remote control PLAY button will start
playback of the first track in the play area. Pressing the
STOP key will pause at the beginning of the first track
in the play area.
The incremental playback function setting is retained
•
even after the power is turned OFF.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
2 Open the menu.
PLAY
3 Select .
INC. PLAY
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set it to
value: ).
OFF
6 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.

Mono playback

You can play back a stereo audio file in mono. In this case,
the left and right signals of the track will be mixed to
mono and the same mono signal will be output from both
the L and R outputs.
Use the menu to make this setting.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
2 Open the menu.
PLAY
3 Select .

OTHERS

4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
menu.
PLAY OTHERS
5 Select .
MONO MIX
36
TASCAM SS-CDR200/SS-R200/SS-R100
screen.
MENU
(default
ON
screen.
MENU
6 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set it to
value: ).
OFF
8 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The setting is retained even after the power is
MONO MIX
turned OFF.
EOM functions (SS-CDR200/SS-R200
only)
By turning EOM functions ON, you can set the unit to
output EOM tally signals from the CONTROL I/O
PARALLEL connector when the track or play area
remaining time becomes less than the set time.

Setting EOM tally output triggers

Use the menu mode to set the track and play area
remaining times that will trigger EOM tally signal output.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
2 Open the menu.
PLAY
3 Select .
OTHERS
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
menu.
PLAY OTHERS
5 Select if you want to set the track
EOM TRACK
remaining time as a trigger or
want to set the remaining time in the play area as
the trigger.
6 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set the remaining
time for the trigger.
options:
EOM TRACK
(default value),
OFF 0s
options:
EOM MEDIA
(default value),
OFF 1s
NOTE
If is set to , when the track ends a pulse of
EOM TRACK 0s
about 100 ms will be output.
(default
ON
screen.
MENU
if you
EOM MEDIA
– (seconds)
99s
– (seconds)
99s