Safety Information - Tascam CD-BT2 Owner's Manual

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS
This product has been designed and manufactured according to
FDA regulations "title 21, CFR, chapter 1, subchapter J, based
on the Radiation Control for Health and Safety Act of 1968," and
is classified as a class 1 laser product. There is no hazardous
invisible laser radiation during operation because invisible laser
radiation emitted inside of this product is completely confined in
the protective housings.
The label required in this regulation is shown at 1.
CAUTION
• DO NOT REMOVE THE PROTECTIVE HOUSING USING A
SCREWDRIVER.
• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
• IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR
NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT
USE THE PRODUCT IN ITS DAMAGED STATE.
• CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. DO NOT VIEW DIRECTORY WITH
OPTICAL INSTRUMENTS.
The CD-BT2 uses either a SONY or a SAMSUNG transport.
DTA
Optical pickup:
Type:
Manufacturer:
Laser output:
Wavelength:
Type:
Manufacturer:
Laser output:
Wavelength:
KSM-900AAA
SONY Corporation
Less than 1 mW on the objective lens
775 to 816 nm
CMS-M93BG6
Samsung Electro-Mechanics Co., Ltd.
Less than 0.4 mW on the objective lens
760 to 800 nm

TASCAM CD-BT2