Using.built-In.effects - Tascam CD-BT2 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
3 Use the keys to adjust the level. The level
VALUE (+, –)
knob icon rotates as you change the value.
NOTE
The input meter at the bottom of this screen shows the
level of the signal input at the BASS IN jack.
Using built-in effects
This device has a built-in multi-effects processor for bass
guitar. Press the key to open the
EFFECT
Using a bass with the trainer
screen.
EFFECTOR
On the screen, use the
EFFECTOR
select items and the
VALUE (+, –)
same way as on other screens. Use the
to move between level knobs and effect modules.
As shown in the figure above, in addition to
, the
PRESET EFFECTOR
knob and icons for up to four bass effect modules. All icons
have adjustable settings.
When you select the knob or effect modules, a pop-up
LVL
appears for the setting items. Use the
select settings in the pop-up, and use the
adjust these settings.
BANK
Select bank – or
01 10 BYPASS
Using the item explained below, you can set a
PRESET
preset effect for each bank. By making presets of settings that
you use frequently in each bank, you can quickly recall the
settings you desire just by switching through the banks.
Select if you do not want to use effects.
BYPASS
( , ) keys to
CURSOR
§ ¶
keys to adjust settings in the
( ,
CURSOR
˙ ¥
and
BANK
screen also shows the
LVL
( , ) keys to
CURSOR
§ ¶
VALUE (+, –)
.
1
TASCAM CD-BT2
) keys
(level)
keys to