Selecting.the.play.mode; Repeat.playback - Tascam CD-BT2 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
Selecting the play mode
This device has the two following play modes.
ALL mode (initial setting)
This is the ordinary mode. Once you start playback, the disc
will play through to the end.
SINGLE mode
After playback of a track is started, that track will play to
the end.
Use the following procedures to select the play mode.
1 Press to open the
MISC.
2 Use the /
CURSOR
§ ¶
the keys to select
VALUE (+, –)
NOTE
If you select ,
SINGLE
time display.
screen.
SETUP & MISC.
keys to select
PLAY MODE
or .
ALL SINGLE
appears to the left of the
Listening to CDs
Repeat playback
In repeat playback mode, depending on the play mode setting,
all tracks (ALL play mode) or the current track (SINGLE play
mode) will play back repeatedly.
When loop playback in ( ) out ( ) points are not set, press the
key to start repeat playback.
LOOP
NOTE
Use the REPEAT item on the SETUP & MISC. screen to set
repeat playback ON and OFF.
When the repeat setting is set to
When the repeat setting is set to
and
, appears.
ALL
, appears.
SINGLE
2
TASCAM CD-BT2