Table of Contents
Advertisement
Using a bass with the trainer
IMPORTANT SAFETY PRECAUTIONS
By connecting a bass to this player, you can mix the input
from the bass with the CD playback sound. You can also use
the built-in bass effects for bass practice.
Adjusting the input level
Use the
volume control next to the
INPUT
adjust the input level.
NOTE
Use the
screen to adjust the signal level after the
LEVEL
sound has been processed by the bass effects.
Adjusting the monitoring volume
Use the
PHONES VOLUME (+, –)
phones output volume. Follow the same procedure used when
adjusting the playback volume of a CD. (See "Adjusting the
volume" on page 25.)
NOTE
When monitoring through the LINE OUT jack using an
audio system or speakers with built-in amplifiers, adjust
the volume on the external device. You cannot adjust the
output level of this device's LINE OUT jack.
0
TASCAM CD-BT2
jack to
BASS IN
keys to adjust the head-
Playing along with a CD
This device combines the signal input through the
jack and the CD playback signal and outputs this mix to
IN
the
and
PHONES
LINE OUT
connect your bass to the player and hear yourself play along
with a CD through the outputs.
Use the following procedures to adjust the CD playback signal
and input signal levels independently to achieve the mix
balance that you desire.
1
Press the
key to open the
LEVEL
The
and
knob icons appear. These adjust the levels
BASS
CD
of the input signal from the
signal.
2 Use the
(
,
CURSOR
˙
you want to adjust. The level value of the selected knob
appears highlighted in a pop-up. (See the following
page.)
BASS
jacks. In other words, you can
screen.
LEVEL
jack and the CD playback
BASS IN
) keys to select the knob that
¥
Advertisement
Table of Contents
