Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Setting the time display
You can set how the CD time is displayed.
Select one of the following
ELAPSED
REMAIN
TOTAL REMAIN
NOTE
The selected time display mode is shown on the
screen.
DISPLAY
Making various settings
settings.
TIME INFO
elapsed time of current track
remaining time of current track
remaining time of entire disc
TIME
Changing the display contrast
You can change the display contrast as needed to suit the
surrounding lighting and other conditions.
Set the
between 1 and 10 with higher numbers
CONTRAST
providing greater contrast.
Restoring all settings to their default
values
Press and hold the
and
µ
turn the power ON to open the
startup.
Follow the instruction on screen after startup, and press the
¥/π key to restore every effect parameter, playback setting
and other function to the default values set when the unit was
shipped from the factory.
keys simultaneously as you
≤
screen at
INITIALIZE
TASCAM CD-BT2
Advertisement
Table of Contents
