Bass.(Bass.tuner.mode); Osc - Tascam CD-BT2 Owner's Manual

IMPORTANT SAFETY PRECAUTIONS
Other functions
BASS (bass tuner mode)
Change the setting for each string to be tuned.
1 Use the key to select
CURSOR
¶
keys to set the standard frequency of
VALUE (+, –)
middle A between 435 Hz and 445 Hz.
This setting affects all tuner modes.
2 Use the key to select
CURSOR
§
keys to select the string that you are
VALUE (+, –)
tuning ( , , ,
1G 2D 3A 4E
The note name of the selected string appears at the top of the
meter. (The matching bass peg is also indicated at the right
side of the screen.)
3 The bass is tuned when the center of the meter is
highlighted. The tuning procedures are the same as
described above for the AUTO mode.

TASCAM CD-BT2
, and the
CALIB
, and use the
NOTE
, ).
5B
OSC. (oscillator mode)
The built-in oscillator can output a sine wave of a pitch in the
three octaves between C2 and B4 through the
jacks. The oscillator mode has the following four
LINE OUT
setting items. Use the
CURSOR
and the keys to change their settings.
VALUE (+, –)
NOTE
Set the output pitch (C2–B4).
OUT
Set whether or not the oscillator sound is output from the
and jacks. When ON, an image of a
PHONES LINE OUT
vibrating pitchfork appears on screen.
LEVEL
Adjust the output sound level between 0 and 100 with the
(–, +) keys.
VALUE
CALIB
Set the standard frequency of middle A between 435 Hz and
445 Hz. This setting affects all tuner modes.
and
PHONES
( , ) keys to select the items
§ ¶