Sunbeam Oskar Professional LC7600C Instruction Booklet page 14

Heading
Storing your sunbeam Oskar Storing your Sunbeam Oskar™ Professional continued
Processing bowl storage, see figure 14.
1.Place the processing bowl onto the base of
the food processor.
2.Fit the spindle over the drive shaft.
3.Place the 'Variable Slicing' blade over the
spindle and then fit the processing cover to
the processing bowl.
Cord storage
The power cord can be stored by pushing it
into the back of the motor base, see
figure 15.
Fig 15
14
Professional continued
®
Fig 14