Sunbeam Oskar Professional LC7600C Instruction Booklet page 10

Using your Sunbeam Oskar™ Professional continued Using your Sunbeam Oskar
Important: If the processing bowl and cover
are not correctly assembled, the Oskar™
Professional will not function.
Using your Oskar Using your Oskar™ Professional ®
1.Plug the power cord into a 230-240V AC
power outlet and turn the power 'ON'.
2.Using the On/Off button on the control
panel, press once to start processing.
The Pulse function remains on as long as the
Pulse button is pressed down.
Further ingredients can also be added while
processing by pouring through the feed tube
once the food pusher has been removed.
10
Oskar
Professional
Professional continued
®
3.After you have completed processing, press
® the On/Off button to stop processing.
Note: For maximum control, load the feed tube
Note: For maximum control when using your
before turning on your food processor. Always
food processor, before turning on your food
use the food pusher formore evenly processed processor load the feed tube. Always use the
foods and never use your fingers. food pusher for more evenly processed foods
and never use your fingers.
Important: The Oskar
with a safety thermal cut-out device and
Important: The Oskar™ Professional is fitted
with a safety thermal cut-out device and
will shut off in the even of overload. If this
will shut off in the event of overload. If this
occurs, switch the appliance off and it will
occurs, switch the appliance off and it will
automatically reset when cool.
automatically reset when cool.
® Professional is fitted