Changing To Transparent Mode; Configuring The Transparent Mode Management Ip Address; Configure The Transparent Mode Default Gateway; Connecting The Fortigate Unit To Your Networks - Fortinet FortiGate 50A Installation And Configuration Manual

Fortinet fortigate installation and configuration guide
Hide thumbs Also See for FortiGate 50A:
Table of Contents

Advertisement

Transparent mode installation

Changing to Transparent mode

Configuring the Transparent mode management IP address

Configure the Transparent mode default gateway

Connecting the FortiGate unit to your networks

FortiGate-50A Installation and Configuration Guide
1
Log into the CLI if you are not already logged in.
2
Switch to Transparent mode. Enter:
set system opmode transparent
After a few seconds, the login prompt appears.
3
Type admin and press Enter.
The following prompt appears:
Type ? for a list of commands.
4
Confirm that the FortiGate unit has switched to Transparent mode. Enter:
get system status
The CLI displays the status of the FortiGate unit. The last line shows the current
operation mode.
Operation mode: Transparent
1
Log into the CLI if you are not already logged in.
2
Set the management IP address and netmask to the IP address and netmask that you
recorded in
Table 14 on page
set system management ip <IP address> <netmask>
Example
set system management ip 10.10.10.2 255.255.255.0
3
Confirm that the address is correct. Enter:
get system management
The CLI lists the management IP address and netmask.
1
Log into the CLI if you are not already logged in.
2
Set the default route to the default gateway that you recorded in
Enter:
set system route number <number> gateway <IP address>
Example
set system route number 1 gw1 204.23.1.2
You have now completed the initial configuration of the FortiGate unit.
When you have completed the initial configuration, you can connect the FortiGate unit
between your internal network and the Internet.
There are two 10/100 BaseTX connectors on the FortiGate-50A unit:
Internal for connecting to your internal network,
External for connecting to the Internet.
Connecting the FortiGate unit to your networks
41. Enter:
Table 14 on page
41.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents