Services; Predefined Services - Fortinet FortiGate 50A Installation And Configuration Manual

Firewall configuration

Services

Predefined services

FortiGate-50A Installation and Configuration Guide
5 To remove addresses from the address group, select an address from the Members
list and select the left arrow to remove it from the group.
6 Select OK to add the address group.
Figure 8: Adding an internal address group
Use services to determine the types of communication accepted or denied by the
firewall. You can add any of the predefined services to a policy. You can also create
custom services and add services to service groups.
This section describes:
• Predefined services
• Adding custom TCP and UDP services
• Adding custom ICMP services
• Adding custom IP services
• Grouping services
The FortiGate predefined firewall services are listed in
services to any policy.
Table 18: FortiGate predefined services
Service name
ANY
Description
Match connections on any port. A connection
that uses any of the predefined services is
allowed through the firewall.
Table 18. You can add these
Protocol Port
all all
Services
149