Fortigate Mibs - Fortinet FortiGate 50A Installation And Configuration Manual

Configuring SNMP

FortiGate MIBs

128
Figure 2: Sample SNMP configuration
The FortiGate SNMP agent supports FortiGate proprietary MIBs as well as standard
RFC 1213 and RFC 2665 MIBs. The FortiGate MIBs are listed in
obtain these MIB files from Fortinet technical support. To be able to communicate with
the SNMP agent, you must compile all of these MIBs into your SNMP manager.
Your SNMP manager might already include standard and private MIBs in a compiled
database that is ready to use. You must add the Fortinet proprietary MIBs to this
database. If the standard MIBs used by the Fortinet SNMP agent are already
compiled into your SNMP manager you do not have to compile them again.
Table 1: FortiGate MIBs
MIB file name or Description
RFC
fortinet-trap.mib The Fortinet trap MIB is a proprietary MIB that is required for your SNMP
manager to receive traps from the FortiGate SNMP agent. For more
information about FortiGate traps, see
fortinet.mib The Fortinet MIB is a proprietary MIB that includes detailed FortiGate
system configuration information. Add this MIB to your SNMP manager
to monitor all FortiGate configuration settings.
RFC-1213 (MIB II) The FortiGate SNMP agent supports MIB II groups with the following
exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11 and
6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.) do
not accurately capture all FortiGate traffic activity. More accurate infor-
mation can be obtained from the information reported by the Fortinet
MIB.
RFC-2665 The FortiGate SNMP agent supports Ethernet-like MIB information with
the following exception.
(Ethernet-like
MIB)
No support for the dot3Tests and dot3Errors groups.
System configuration
Table 1. You can
"FortiGate traps" on page
Fortinet Inc.
129.