AOpen AX4SPE Max Online Manual page 123

A X 4 S P E M a x
A X 4 S P E M a x
5. See instructions in section A to verify controller was installed correctly.
-------------------------------------------------------------------------------------------------------------
9) Update SiI RAID driver on Windows 98SE/ME with existing Silicon Image driver
-------------------------------------------------------------------------------------------------------------
With the Silicon Image controller already plugged in and the driver already installed. Follow the instructions to update SiI 3112 driver.
1. Right click on 'My Computer' and select 'Properties'. Under 'System Properties', click 'SCSI and RAID Controller' and right click 'Silicon
Image Ultra-133 Medley ATA Raid Controller'.
2. Click 'Driver', 'Update Driver' and select 'Automatic search for a better driver [Recommended]'. Insert the driver diskette into floppy drive.
Click 'Next' and complete the driver installation.
3. System will go through the enumeration process and install the driver. At the end of the process, click 'Yes' to reboot your system.
4. See instructions in section A to verify controller was installed correctly.
-------------------------------------------------------------------
A) Using Control Panel Utility (Windows 98SE/ME)
-------------------------------------------------------------------
Follow the instructions in this section to verify that the controller was installed correctly on Win98SE and Windows ME.
1. Right click on 'My Computer' icon, select 'Properties'. Click on 'Device Manager' tab.
2. Double click on 'SCSI and RAID Controllers', if there is no yellow '! 'or ' ? 'in front of 'Silicon Image SiI 3112 SATA Raid Controller', the
driver is started correctly.
3. To view information about the devices attached to the controller, use the SiICfg Utility and click on the device from the list.
123
O n l i n e M a n u a l
O n l i n e M a n u a l