AOpen AX4SPE Max Online Manual page 120
Hide thumbs
Also See for AX4SPE Max:
- Manual (59 pages) ,
- Easy installation manual (8 pages) ,
- Easy installation manual (8 pages)
Table of Contents
Advertisement
A
X
4
S
P
E
M
a
x
O
n
l
i
n
e
M
a
n
u
a
l
A
X
4
S
P
E
M
a
x
O
n
l
i
n
e
M
a
n
u
a
l
1. Double click on 'My Computer' icon, select 'Control Panel', click on 'SCSI Adapters' icon, 'Silicon Image SiI 3112 SATA Raid Controller'
should displayed correctly under 'Device' and 'Driver' tab.
2. To view information about the devices attached to the controller, use the SiICfg Utility and click on the device from the list.
----------------------------------------------------------------------------------------------------------
5) Update SiI RAID driver on Windows NT 4.0 with existing Silicon Image driver
----------------------------------------------------------------------------------------------------------
1. After OS boots up, Click 'Start'
2. Under 'Settings', click 'Control Panel'.
3. Select 'SCSI Adapters' from the Control Panel.
4. Select the 'Drivers' tab and click 'Add'.
5. Click 'Have Disk'.
6. Insert the diskette labeled 'Silicon Image SiI 3112 SATA Raid Driver Installation Disk' into A: and press 'Enter'.
7. Choose 'Silicon Image SiI 3112 SATA Raid Controller' and click 'OK'.
8. Refer to instructions in section 4 to verify controller was installed correctly.
------------------------------------------------------------------------------------------------------------
6) Update SiI RAID driver on Windows 2000/XP with existing Silicon Image driver
------------------------------------------------------------------------------------------------------------
120
Advertisement
Table of Contents
