Page 1
JP14 CMOS Data Clear Jumper channel DDR400/333/266 Max. to 2GB Front Panel Connector Case Open Connector IDE Connector x 2 (ATA33/66/100 supported) AOpen reserves the right to revise all the specifications and information contained in this document, which are subject to change without notice.
1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this motherboard is included in this 3.
3. Connecting ATX Power Connector 5. Setting CPU Voltage & Frequency This motherboard comes with a 20-pin and 4-pin ATX power connector as shown below. Full-range Adjustable CPU Core Voltage This motherboard supports CPU VID function. The CPU core voltage will be automatically Make sure you plug in the right direction.
8. Connecting CPU & System Fans 6. Connecting IDE & Floppy Cables Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDD and IDE Plug in the CPU fan cable to the 3-pin CPUFAN1 connector. If you have chassis fan, you connector.
10. Connecting IrDA Connector 12. S/PDIF Connector The IrDA connector can be configured to support wireless infrared module. With this module S/PDIF (Sony/Philips Digital Interface) is a latest audio transfer file format that provides impressive quality through optical fiber and allows you to enjoy digital audio instead of analog. and application software such as Laplink or Windows 98 Direct Cable Connection, user can Normally there are two S/PDIF outputs as shown, one for RCA connector, the most common transfer files to or from laptops, notebooks, PDA devices and printers.
BIOS Setup, press <Del> during POST (Power On Self Test). upgrading. Choose "Load Setup Defaults" for recommended optimal performance. Download the new version of BIOS package zip file from AOpen official web site. (ex: http://english.aopen.com.tw) Unzip the download BIOS package (ex: WAX4SGGN102.ZIP) with WinZip (http://www.winzip.com) in Windows environment.
IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. AX4SG-GN is model name of motherboard; R1.00 is BIOS version...
Page 8
Online Manual: To download manual, please log on and then select your preferred language. Under “Type” directory, choose “Manuals” to go to our manual database. You can also find the manual and EIG in AOpen Bonus Pack. http://download.aopen.com.tw/downloads Dear Customer, Thanks for choosing AOpen products.