Complete Command Set; Configure Ethernet Interface - AOpen ISDN SOHO Router User Manual

5.2 Complete Command Set

The commands can be loosely grouped into two categories: show and config. The show will display
a category of information and config will configure that category.
The following command is available at all level in the menu.
? Display all the available commands for that level.
help Display all the available commands for that level with a description for
each.
quit Go up one level toward the top, that is the root.

5.3 Configure Ethernet Interface

config interface ether ip address <IP address> <netmask>
Configure the ethernet interface with the <IP address> and the <netmask>
Every machine connected to the TCP/IP network must have an unique IP address.
address is always presented by dotted decimal format (four 8-bit number between 0 to 255
separated by periods), e.g.
Assigned Numbers Authority). The IANA had reserved the following IP address for the private
network, therefore it is recommended that you follow the defined rules.
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
An IP address consists of network ID and host ID. The netmask is used to extract the network ID from the
dotted decimal notation. The router will automatically calculate the network ID from the IP address and
netmask. This command configures the IP address and network mask for the LAN of this router.
ISDN Router Manual V.1.1
The IP address was defined by the IANA (Internet
123.97.35.7.
23
The IP