Router Command Line Interface - AOpen ISDN SOHO Router User Manual

5. Router Command Line Interface

To access the Router Command Line Interface (CLI), enter the following command:
AT:
The SOHO router then presents a log on banner where you type in your ID and password to log on.
If logged on successful, the user is presented with the Router CLI Interface prompt that looks like
this.
at:
OK
Router Command Line Interface
Console Login: admin
Password: ******
CLI>
Please note: The default Console Login is admin and Password is also admin.
As its name implied, the Command Line Interface is an interface where every command must be
entered in a single line.
A command is a sequence of tokens or words that are separated by spaces or tabs and terminated by
a carriage return. Each token represents as a sub-menu or level, and a choice of the next token is
available at every level. To exit CLI and return to AT command interface, type exit then the router
will return to the AT command mode.
Once at the command prompt, the user can get the available commands at that level by entering ? or
help for all the command with a description of each command that looks like this:
ISDN Router Manual V.1.1 18