Other Useful Features; Adjusting The Audio; Titling Discs/Radio Stations - Alpine VPE-S431 Operating Instructions Manual

Other Useful Features

Adjusting the Audio

Press the Rotary encoder on the unit.
The display changes to the Audio Adjustment screen.
Display Example for Audio Adjustment Screen
3
2
1
1 Adjust the volume of the front and rear speakers by
touching [F] or [R].
2 Adjust the volume of the left and right speakers by
touching [L] or [R].
3 Determine your desired setting value by touching and
moving [\].
4 Touches [;] or [:] to adjust to your preference.
• Touch [AUDIO MODE] on the SYSTEM selection screen to change
to the Audio Adjustment screen.
Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
Adjusting the Subwoofer Level
Touch [;] or [:] of SUBW. to adjust the subwoofer output.
Setting range: 0 to 15
• The level adjustment becomes available when 0° or 180° is set in
"Subwoofer On and Off" (page 40).
Adjusting NAV. LEVEL
Touch [;] or [:] of NAV. to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• This adjustment becomes available when NAV.MIX is turned on in
"Setting the Navigation Interruption" (page 33).
Turning defeat ON or OFF
Touch [;] or [:] of DEFEAT to turn it ON or OFF.
If you set the defeat to ON, MX is turned OFF and EQ is
returned to the initial setting.
Adjusting the BASS Level
Touch [;] or [:] of BASS to adjust the low frequency
bass level.
Setting range: 0 to 11
• This adjustment becomes available when AMP Link compatible
external amplifiers (MRD-M301 and MRD-M501) are connected.
Adjusting the Balance/Fader Directly
Touch and move [\] to a desired setting.
Or touch a desired setting range, and [\] will move to that location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.

Titling Discs/Radio Stations

The Parking Brake must be engaged to access the Title Input
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
4
You can title discs (CD, Video CD) and radio stations. This manual
describes how to title Radio stations (In the RDS mode, you can only
input a title when PI is not being received). You cannot title DVD and
MP3/WMA discs.
1
Activate the Radio mode.
2
Touch [TITLE] on the radio main screen.
The title input screen appears.
3
Touch a desired character symbol to input. Up to
16 digits can be input.
Each time [A/a/1/+] is touched, alphabet upper case,
lower case, numerical and then symbols are selected.
Display example for title input screen
2
1
9
1 Moves the cursor to the left in the input area
2 Input area
3 Moves the cursor to the right in the input area
4 Changes between character and symbol
5 All you have input is deleted
6 Deletes a previous character
7 Confirms and stores a title you have input
8 Returns to a previous screen
9 Character/Symbol Pallet
4
Touch [ENT] to confirm the input title.
The display changes to the radio mode.
• You can enter up to 100 titles of radio stations, CD and video CD.
• You cannot enter file name, folder name and tag information on
MP3/WMA files on this unit.
• When the memory is full, "Full Data" is displayed for 2 seconds.
At this point, touch [ENT] to delete the oldest title you have input
first, and then you can input a new one.
• Immediately after inputting titles or changing the settings of Setup
mode or Display mode (while the system is inputting the titles or data
automatically) do not turn the ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings may not be changed.
3
4
5
6
7
8
23
-EN