Table of Contents
Advertisement
.........................................................................................................................................................................
Depending on whether the system is already running the Solaris
12
default port for the SMS SNMP Agent or define another port, as needed.
Result:
The installation program prompts you to define an SNMP Read Community.
.........................................................................................................................................................................
Accept the SNMP Read Community default
13
The SNMP values in steps 11 to 13 can be modified after the installation using the SMS
Configuration Assistant.
For additional information on how the SMS interacts with SNMP, refer to the Simple
Network Management Protocol (SNMP) chapter in the SMS Administration Guide.
For additional information about the SMS Configuration Assistant, refer to the Using the
Configuration Assistant chapter in the SMS Administration Guide.
The installation program displays the following message:
Result:
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
This package contains scripts which will be
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
executed with super-user
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
permission during the process
12345678901234567890123456789012123456789012345678901
of installing this package.
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
.........................................................................................................................................................................
Enter
to proceed with the installation.
14
Y
The installation program begins to copy files to the target directory and echoes
Result:
each of the file copies to the console window.
When all of the files have been copied, the installation program prompts you to
indicate whether this is a Primary, Secondary, or Compute Server SMS.
As of Release 8.0, the SMS type is pre-determined by the installation key that is used.
The system prompts you to enter the IP address to be used by the SMS.
.........................................................................................................................................................................
Enter
and press
1
15
.
[Enter]
The installation program displays a prompt that shows the default name of the
Result:
SMS machine.
If a Secondary or Compute Server SMS is being installed, the system prompts for the
IP address of the Primary SMS so the SMS database can be accessed. Enter the IP
address.
to accept the default, or enter another IP address and press
[Enter]
To Install the SMS Application (Clean Installation)
®
SNMP Agent, accept the
, or modify as needed.
(public)
...................................................................
55
Advertisement
Table of Contents
