Playing External Components; Making An Connection With Onkyo Components - Onkyo BR-925 Instruction Manual

Playing External Components

Playing External Components
Connect the external components correctly. See "Con-
necting Other Components" on page 19.
1 Switch the input source.
Press the INPUT [ ]/[ ] button to select
LINE1, LINE2, or LINE3.
You can also use the
[INPUT SELECTOR] button to select
the input source.
2
Start playback.
For the playback operation, see the
instruction manual of the external com-
ponents connected.
Making an Connection with
Onkyo Components
By making an (remote interactive) connection
with an Onkyo -capable component and speci-
fying the selector name of the component, the com-
ponent can be controlled with the
interface, working with the CD/HDD receiver.
What can you do with
You can use the CD/HDD receiver's remote controller
to operate components with an
"Controlling External Components" on page 73.
When you start playback on a component with an
connection, the CD/HDD receiver automatically
switches the input source (Direct Change).
While the CD/HDD receiver is in Standby mode, if
you turn on the power or start the playback of the com-
ponents with an connection, the CD/HDD
receiver will automatically turn on. When the
CD/HDD receiver is set to Standby mode, the compo-
nents with an connection will also enter Standby
mode (Auto Power ON/Standby).
/
INPUT
's
CD/HDD receiver
control
?
connection. See
1
Switch the input source to a com-
ponent you want to have interac-
tive control.
Press the INPUT [ ]/[ ] buttons. You
can also use the CD/HDD receiver's
[INPUT SELECTOR] button to select
the input source.
2 Press the [TOOLS] button and
then press [ENTER] with "Tool"
selected.
Tool
Record
Audio
3
Press [ENTER] with "Name
Select" selected.
Tool
Name Select
4
Press the Up and Down [ ]/[ ] to
select a
TAPE
DOCK
DIGITAL
GAME/dig
*1 This should be selected if you connect an
audio processor such as the Onkyo UE-205.
To cancel changing the selector name,
press the [RETURN] button.
5 Press [ENTER].
"Complete!" will be displayed, and the
selector name of the external component
has been set. The external component
can be controlled via
Tool
Name Select
Selector indicator Selector name
-capable components.
MD VIDEO
DAT
CD-R PC
CD-R/dig
* 1
PC/dig
.
:TAPE
45