Table of Contents
Advertisement
Using Audyssey EQ™ and Audyssey Dynamic EQ™
Audyssey EQ™ optimizes the audio quality set for the
recommended Onkyo speakers. The recommended
speakers are D-112E and D-N10BX.
With Audyssey EQ™ enabled,
Audyssey Dynamic EQ™ becomes enabled by default.
You can deactivate Audyssey Dynamic EQ by selecting
"Off" in step 4 below. When Audyssey EQ™ is activated
while the Direct function is on, the Direct function will
be turned off.
Notes:
Audyssey Dynamic EQ™ allows you to maintain the
proper octave-to-octave balance at any volume level in
accordance with the preset speakers.
• In order to record with appropriate sound,
Audyssey EQ™ is automatically deactivated during a
recording. After the recording is finished,
Audyssey EQ™ and Audyssey Dynamic EQ™ will
resume as previously set.
1
Press the [TOOLS] button.
2
Use the Up and Down [ ]/[ ] but-
tons to select "Audio", and then
press [ENTER].
3
Press [ENTER] with
"Audyssey EQ" selected.
4
Use the Up and Down [ ]/[ ] but-
tons to select the speaker, and
then press [ENTER].
(The above is an example when D-
112E is selected.)
"Complete!" will be displayed, and the
setting is completed.
Audyssey Dynamic EQ™ becomes
active and the Dynamic EQ indicator
lights up.
26
Tool
Record
Audio
Audio
Audyssey EQ
[Dynamic EQ]
Audio
Audyssey EQ
:D-112E
Dynamic EQ indicator
Deactivating Audyssey Dynamic EQ™
1
Press the [TOOLS] button.
2
Use the Up and Down [ ]/[ ] but-
tons to select "Audio", and then
press [ENTER].
3
Use the Up and Down [ ]/[ ] but-
tons to select "Dynamic EQ",
and then press [ENTER].
4
Use the Up and Down [ ]/[ ] but-
tons to select "Off", and then
press [ENTER].
"Complete!" will be displayed, and the
setting is completed.
Audyssey Dynamic EQ™ becomes
deactive and the Dynamic EQ indicator
goes off.
When the Direct function is on while
Audyssey Dynamic EQ™ is activated,
Audyssey Dynamic EQ™ will be deactivated. In this
status, when the Direct function is turned off,
Audyssey Dynamic EQ™ will resume.
About Audyssey Dynamic EQ™
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased by
taking into account human perception and room
acoustics. Dynamic EQ selects the correct frequency
response moment-by-moment at any user-selected
volume setting. The result is bass response and tonal
balance that remains constant despite changes in
volume. Dynamic EQ combines information from
incoming source levels with actual output sound
levels in the room, a prerequisite for delivering a
loudness correction solution. Audyssey Dynamic EQ
works in tandem with Audyssey EQ to provide well-
balanced sound for every listener at any volume level.
Tool
Record
Audio
Audio
Audyssey EQ
Dynamic EQ
Audio
Dynamic EQ
: Off
Advertisement
Table of Contents
