Table of Contents
Advertisement
USB Device Playback—Continued
Basic Operations of Playback
1
2
CD/HDD
Remote
receiver
controller
or
3
CD/HDD
Remote
receiver
controller
or
Removing the USB Device
1 Stop the playback and switch the input source to USB.
2 Hold down the Stop [ ] button until "No USB" appears.
3 Disconnect the USB or USB cable from the CD/HDD receiver.
Do not disconnect the USB cable until you see the "No USB" message.
42
USB port
Plug your USB device into the CD/HDD receiver's USB port.
In the case of an iPod or digital audio player:
1. Connect the USB cable to the connector of the iPod or digital audio player.
2. Plug the USB cable into the
The iPod or digital audio player automatically turns on. The
approximately one minute to recognize the iPod, so wait until the recognition is com-
pleted.
Switch the input source to USB.
Press the INPUT [ ]/[ ] buttons. You can
also use the [INPUT SELECTOR] button
to select the input source.
Start playback.
Press the Play/Pause [
[
] button.
Tip:
When you press the remote controller's
USB [
] button, the
automatically selects an appropriate input
source and starts playback of a track.
INPUT
SELECTOR
USB cable
CD/HDD receiver
/ ] or Play
CD/HDD receiver
's USB port.
CD/HDD receiver
Artist name
Album name
Track01
00:00
Track name Format
The track information appears on the dis-
play of the
CD/HDD receiver
logo appears on the display of the iPod.)
Album name
Track01
00:11
Elapsed time of current track
Playback starts with the first track of the
first folder.
INPUT
may take
1/ 1
. (ONKYO
Advertisement
Table of Contents
